I thought I would show you how to make one of these lovely upcycled wreaths.
Here's what you'll need:
Fabric(I used old baby clothes as well as a few other scraps of fabric that I had around)
scissors
wire wreath ring
Instructions:
Cut fabric into 2.5" by 6" or 7" strips
I would not go any shorter than 6" because it will make it too hard to tie onto the ring.
You are going to need a lot so keep cutting. I used fabrics that were all around the same shade but in different hues (colors). But I also used a few darker and brighter fabrics to make it pop.
I ended up using about 220 strips on the 14" wire wreath.
Once all your fabric is cut you are ready to start assembling your wreath.
Side note: I organized my fabrics in order on how I was going to place them on the wreath. I did not want any one color clumped together on the wreath. This is purely a personal choice. You can choose to do this or place them randomly on the wreath.
While this is an easy task it is time consuming.
Take a strip of fabric
Then fold it in half length wise.
Take it and tie a knot around the wire wreath ring.
I tied the cross bars first.
(I am going to number the rings starting with the very outside ring being 1 and the two middle rings are 2 & 3 with the inside ring being #4.)
Tie scraps onto rings 2 & 3
I reversed my pattern that I did on ring 2 for ring 3 in each section.
Photo shows rings 2&3 with all scraps tied on and 1 & 4 are empty. |
Finally I tied on rings 1 &4
Here is what the back looks like
Here are a few images of the final product.
Good luck in making your wreath. Please post a comment if you have any tips on this project or any other project you would like to learn how to do.
I listed it on ETSY so if you don't feel like making your own....